CiT Raider AIR Mid Tower Case
SKU
DPCCAS-172
£53.47
The Raider Air comes equipped with a full mesh front panel to get the utmost possible airflow and still see the three beautiful Raider fans installed behind it. Like the original Raider the Air includes four pre-installed 120mm Halo Dual-Ring fans.
Control your pre-installed fans using the PCB hub and RF controller. The RF controller enables you to use it anywhere within a 10mm range and allows for 6 single colours (Red, Green, Blue, Cyan, Purple and Yellow), multiple colour options, a variety of lighting modes, speed and brightness (To control the brightness using the speed buttons on the remote you must choose the 7 single colour modes and if the spectrum colour mode has been selected you can control the fan speed using the speed buttons) all at the touch of a button.
A 3 Pin AURA connector comes included and allows you to control all your devices connected to the PCB hub using motherboard software (Please note your motherboard must have a 5V 3 Pin RGB Connection). Giving you even more control!
Delivery Info
- Components & Accessories: Normally delivered in in 3-5 working days - delivery cost: £4.99
- Prebuilt PC's: Free delivery to mainland UK - normally delivered in 1-2 working days.
- Custom PC's: Free delivery to mainland UK. Please see the 'turnaround' option on each page.
All orders are despatched by DPD on a Next Working Day service, and you will be advised of a one hour delivery window, which you can rearrange if required.
Item in Stock
Features
- Stylish Exterior - A full mesh front panel accompanied by 3 x 120mm Halo Dual-Ring fans enabling direct airflow deliveries a much more balanced performance.
- Four ARGB Fans Included - Overall the chassis supports up to eight fans with four pre-installed Halo Dual-Ring fans included adds a stunning look to any PC build.
- Water-Cooling Support - The Raider Air chassis has room to mount a total of eight fans and install a radiator up to 240mm in the front / top and at the back a 120mm radiator provide extensive cooling support.
- PCB Hub - The four pre-installed fans are controlled by an included PCB hub and can fit up to 10 devices, 8 x 5 Pin fans and 2 x 3 Pin LED strips. The PCB hub comes with a SATA connector for easy connectivity and alternatively a 3 Pin 5V RGB connector has been included meaning the fans can be hooked up and controlled via motherboard sync taking your Raider to new heights.
- Tempered Glass - A four millimetre tempered glass side panel included allows you to showcase your lighting and components from all angles and provides the platform to create a show stopping PC.
- RF Remote - At the touch of a button make it even easier and more efficient to control your LED lighting with the RF remote you have the option of seven single colours, multiple colour options, a variety of lighting modes, speed and brightness.
- I/O Ports - Easy accessible 2 x USB2.0, 1 x USB 3.0 ports on the top with transfer speeds of 5Gbps means you can connect to a range of media devices.
- Removable Dust Filters - A dust filter on the top and bottom of the Raider helps to prevent dust from getting into your build and helps improve the performance of your chassis.
Specifications
Form Factor | Mid Tower |
Motherboard Support | ATX mATX Mini-ITX |
Drive Bays | 3x 2.5" 2x 3.5" |
Expansion Slots | 7 horizontal |
Max GPU Length | 355mm |
Max Cooler Height | 160mm |
Max PSU Length | ATX |
Front Fan Mounts | 3x 120mm 2x 140mm |
Top Fan Mounts | 2x 120mm 2x 140mm |
Rear Fan Mounts | 1x 120mm |
Bottom Fan Mounts | 0 |
Pre-installed Fans | 4x 120mm ARGB |
Dimensions | 196 x 450 x 400 (mm) |
Front I/O | 1x USB 3.0 2x USB 2.0 1x 3.5mm Headphone 1x 3.5mm Microphone |
Manufacturer | CIT |
---|---|
Manufacturer Part Number | CIT-RAIDER-AIR |
Write Your Own Review